Agency Acronym
OSHA

US Department of Labor launches self-audit programs to help regulated community strengthen compliance with federal labor laws

News Release

US Department of Labor launches self-audit programs to help regulated community strengthen compliance with federal labor laws

Programs from 6 agencies include new, updated options for assessment, correction

WASHINGTON – The U.S. Department of Labor today announced several programs designed to help employers, unions, and pension plans voluntarily assess and improve their compliance with federal labor laws.

The self-audit programs, which include new and updated offerings, aim to enhance worker protections while reducing the likelihood of formal investigation or litigation.  

“Self-audits are one of the most effective ways to build a culture of compliance and trust,” said Deputy Secretary of Labor Keith Sonderling. “These programs are designed to give employers, unions, and benefit plan officials the tools they need to correct potential violations proactively. By empowering the regulated community with clarity and collaboration, we are continuing to fulfill the Department of Labor’s mission to put both workers and employers first.”

The following agencies offer self-audit programs:

  • Employee Benefits Security Administration: EBSA offers two key self-correction programs for fiduciaries and benefits plan administrators: the Voluntary Fiduciary Correction Program, which encourages employers and plan officials to voluntarily correct violations of the Employee Retirement Income Security Act, and the Delinquent Filer Voluntary Compliance Program, which encourages voluntary compliance with ERISA’s annual reporting requirements and offers incentives to late filers, including paying lower penalties.
  • Mine Safety and Health Administration: MSHA’s new Compliance Assistance in Safety and Health program features resources available to mining operations via an information hub on the MSHA.gov website. This hub provides links to a variety of safety and health topics to assist mining operations and provides direct contact to safety and health specialists to address their needs related to compliance assistance.
  • Occupational Safety and Health Administration: OSHA is expanding its Voluntary Protection Programs to meet businesses where they are on their safety journey to help develop strong safety programs and lower injury rates, allowing them to undergo regular self-evaluations and avoid routine inspections. OSHA is increasing its efforts to support voluntary compliance through its On-Site Consultation Program, which offers no-cost and confidential safety and health services to small and medium-sized businesses.
  • Office of Labor-Management Standards: OLMS administers the Voluntary Compliance Partnership program to help unions assess their compliance with the Labor-Management Reporting and Disclosure Act. The program focuses on key areas such as reporting and disclosure requirements, as well as financial integrity.
  • Veterans’ Employment and Training Service: VETS has launched a new program, SALUTE: Support and Assistance for Leaders in USERRA Training and Employment, to help employers proactively review their policies and practices under the Uniformed Services Employment and Reemployment Rights Act. The program aims to foster good-faith compliance and ensure the employment rights of service members are respected.
  • Wage and Hour Division: The Wage and Hour Division is restarting the Payroll Audit Independent Determination program to enable employers to self-identify and resolve minimum wage, overtime, and leave violations under the Fair Labor Standards Act and Family and Medical Leave Act. 

Visitors can access resources, toolkits, and program-specific guidance at dol.gov/SelfAudit.

Agency
Office of the Secretary
Date
July 24, 2025
Release Number
25-1092-NAT
Media Contact: Courtney Parella
Share This

Federal investigators cite waste management company for failure to implement confined space entry requirements resulting in worker fatality

News Release

Federal investigators cite waste management company for failure to implement confined space entry requirements resulting in worker fatality

CLEVELAND – A U.S. Department of Labor investigation found that Clean Harbors Environmental Services Inc., a Massachusetts-based environmental and hazardous waste management service provider, failed to properly ventilate a confined space containing organic chemical residue at a customer’s facility in Twinsburg, Ohio, resulting in a worker fatality. 

The department’s Occupational Safety and Health Administration determined the employer failed to implement  legally mandated permit-required space entry requirements. Specifically, OSHA found that the employer failed to ventilate, test the environment and use non-entry rescue equipment, including a tripod, mechanical winch, and full-body retrieval harness.

OSHA cited Clean Harbors Environmental Services Inc. for violations including three willful and proposed $602,938 in penalties. 

Employers can visit OSHA’s website for information about confined space entry safety requirements, and contact the agency for information about OSHA’s compliance assistance resources and for free help complying with OSHA standards. 

Agency
Occupational Safety & Health Administration
Date
July 21, 2025
Release Number
25-1124-CHI
Media Contact: Chauntra Rideaux
Media Contact: Juan Rodriguez
Share This

US Department of Labor, Newark roofing contractor reach settlement agreement affirming $155K penalty for multiple violations

News Release

US Department of Labor, Newark roofing contractor reach settlement agreement affirming $155K penalty for multiple violations

NEWARK, NJ – The U.S. Department of Labor and a Newark roofing contractor have reached a settlement agreement resolving litigation stemming from investigations last summer that found the employer repeatedly exposed workers to fall and safety hazards at two worksites. 

The department’s Occupational Safety and Health Administration initially investigated RRC Home Improvement Inc. in June 2024 at a worksite in Dover, New Jersey after receiving reports of employees working on a roof without fall protection. In July 2024, investigations began at RRC worksites in Lodi as part of the agency’s National Emphasis Program for Falls in Construction. Inspectors again observed employees working without required fall protection. OSHA also uncovered violations involving lack of hard hats, eye protection, and fire extinguishers, as well as non-compliant pump jack scaffold poles and unsafe ladder use.

The settlement agreement between OSHA and RRC Home Improvement affirms the citations issued after the 2024 inspections, which included four willful and seven serious violations. The company also agreed to pay a $155,000 penalty. 

As part of the settlement, the company agreed to implement enhanced abatement measures, including reporting all jobsites to OSHA before commencing work and providing OSHA with a written site-specific fall protection plan for the worksite, including certification that all employees have completed a fall protection training course.

Learn more about OSHA. 

Agency
Occupational Safety & Health Administration
Date
July 21, 2025
Release Number
25-1128-NEW
Media Contact: Joanna Hawkins
Share This

US Department of Labor updates penalty guidelines to support small businesses and eliminate workplace hazards

News Release

US Department of Labor updates penalty guidelines to support small businesses and eliminate workplace hazards

Penalty adjustments aim to improve workplace safety

WASHINGTON – The U.S. Department of Labor has updated its guidance on penalty and debt collection procedures in the Occupational Safety and Health Administration's Field Operations Manual in an effort to minimize the burden on small businesses and increase prompt hazard abatement. 

“All employers should be offered the opportunity to comply with regulations that help maintain a safe working environment,” said Deputy Secretary of Labor Keith Sonderling. “Small employers who are working in good faith to comply with complex federal laws should not face the same penalties as large employers with abundant resources. By lowering penalties on small employers, we are supporting the entrepreneurs that drive our economy and giving them the tools they need to keep our workers safe and healthy on the job while keeping them accountable.” 

The new policy, outlined in the Penalties and Debt Collection section of OSHA’s Field Operations Manual, increases penalty reductions for small employers, making it easier for small businesses to invest resources in compliance and hazard abatement. For example, a penalty reduction level of 70%, which was previously only applicable for businesses with 10 or fewer employees, will now be expanded to include businesses who employ up to 25 employees. The revisions also include new guidelines for a 15% penalty reduction for employers who immediately take steps to address or correct a hazard.

Additionally, the updated policy expands the penalty reduction for employers without a history of serious, willful, repeat, or failure-to-abate OSHA violations. Under OSHA’s revised policy, employers who have never been inspected by federal OSHA or an OSHA State Plan, as well as employers who have been inspected in the previous five years and had no serious, willful, or failure-to-abate violations, are eligible for a 20% penalty reduction. 

The new policies are effective immediately. Penalties issued before July 14, 2025, will remain under the previous penalty structure. Open investigations in which penalties have not yet been issued are covered by the new guidance.

OSHA retains the right to withhold penalty reductions where penalty adjustments do not advance the goals of the Occupational Safety and Health Act. 

Learn more about OSHA.

Agency
Occupational Safety & Health Administration
Date
July 14, 2025
Release Number
25-1159-NAT
Media Contact: Kristen Knebel
Share This

US Labor Department cites Georgia counter manufacturer for exposing workers to hazardous levels of crystalline silica

News Release

US Labor Department cites Georgia counter manufacturer for exposing workers to hazardous levels of crystalline silica

Brazilian Stone Design LLC to pay $33K in penalties after OSHA finds 7 serious violations

ATLANTA – U.S. Department of Labor safety inspectors determined that Brazilian Stone Design LLC, a Powder Springs stone countertop manufacturer, exposed workers to respirable crystalline silica.

The department’s Occupational Safety and Health Administration cited the employer, which fabricates and sells kitchen and bathroom countertops, with seven serious citations. The employer will pay $33,000 in penalties.

The employer was cited for allegedly exposing workers to high airborne concentrations of respirable crystalline silica and failing to require the use of respirators; perform fit testing and training for workers wearing respirators; conduct air monitoring; and administer an effective hearing conservation program.

To help protect workers, OSHA has issued two respirable crystalline silica standards, one for construction and the other for general industry and maritime. Learn more about crystalline silica.

Visit OSHA’s website for information on developing a workplace safety and health program. Employers can also contact the agency for information about OSHA’s compliance assistance resources and for free help on complying with OSHA standards.

Agency
Occupational Safety & Health Administration
Date
July 10, 2025
Release Number
25-930-ATL
Media Contact: Erika Ruthman
Media Contact: Eric R. Lucero
Phone Number
Share This

US Department of Labor cites Georgia-based Keystone Foods for exposing workers to fire, explosion hazards

News Release

US Department of Labor cites Georgia-based Keystone Foods for exposing workers to fire, explosion hazards

Keystone Foods LLC cited with serious violation, faces over $16K in proposed penalties

ATLANTA – U.S. Department of Labor safety inspectors cited Keystone Foods, a distributor for Tyson Foods, for allegedly failing to protect employees against fire and explosion hazards at its Camilla, Georgia, poultry plant.   

The department’s Occupational Safety and Health Administration determined that on Dec. 26, 2024, two workers at the plant, which is a wholly owned subsidiary of Tyson Foods Inc., were seriously burned when a hose filled with oil ruptured, igniting the oil mist and causing a fire and explosion in the boiler room. Inspectors concluded Keystone Foods did not ensure workers followed proper internal procedures nor the manufacturer’s guidelines when conducting maintenance on its boiler pump. 

OSHA issued Keystone Foods a citation for a serious violation under the OSH Act’s general duty clause and proposed penalties of $16,550.

The company has 15 business days from receipt of their citations and penalties to comply, request an informal conference with OSHA, or contest the findings before the independent Occupational Safety and Health Review Commission. 

Visit OSHA’s website for information on developing a workplace safety and health program. Employers can also contact the agency for information about OSHA’s compliance assistance resources and for free help on complying with OSHA standards. 

Agency
Occupational Safety & Health Administration
Date
July 10, 2025
Release Number
25-1014-ATL
Media Contact: Erika Ruthman
Media Contact: Eric R. Lucero
Phone Number
Share This

US Department of Labor cites Orlando aerospace facility for safety, health failures after fire injures workers

News Release

US Department of Labor cites Orlando aerospace facility for safety, health failures after fire injures workers

Aerojet Rocketdyne Coleman Aerospace Inc. faces $262K in proposed penalties

ORLANDO, FL – The U.S. Department of Labor has cited an Orlando target-missile manufacturer for exposing workers to fire, burn, and inhalation hazards, after a December 2024 fire at its facility, hospitalizing two employees and injuring others. 

Investigators with the department’s Occupational Safety and Health Administration found that two employees of Aerojet Rocketdyne Coleman Aerospace Inc. were severely burned, and another sustained injuries from burns and smoke inhalation while they worked on a missile component. OSHA also determined that the employer exposed other workers to burn and inhalation hazards from incorrectly stored and handled explosives and from failing to classify the physical hazards of a highly reactive chemical.

Aerojet Rocketdyne was cited with one willful and six serious violations, with proposed penalties totaling $262,451.

The employer has 15 business days from receipt of the citations and penalties to comply, request an informal conference with OSHA, or contest the findings before the independent Occupational Safety and Health Review Commission. 

Learn more about OSHA. Employers can also contact the agency for information about OSHA’s compliance assistance resources and for free help on complying with OSHA standards.

Agency
Occupational Safety & Health Administration
Date
July 8, 2025
Release Number
25-854-ATL
Media Contact: Erika Ruthman
Media Contact: Eric R. Lucero
Phone Number
Share This

US Department of Labor renews national emphasis program to address amputations in manufacturing

News Release

US Department of Labor renews national emphasis program to address amputations in manufacturing

WASHINGTON – The U.S. Department of Labor’s Occupational Safety and Health Administration is renewing its National Emphasis Program on Amputations in Manufacturing Industries focused on preventing amputations in manufacturing workplaces. 

Under the renewed program – which aims to find and reduce dangers that could lead to amputations and other injuries in the manufacturing sector – OSHA will conduct inspections of manufacturing facilities to ensure compliance with safety practices while operating, servicing, or maintaining machines. This includes controlling dangerous energy sources and making sure machines are properly guarded to prevent amputations. The program looks at companies using machinery that pose a risk of amputation. 

Significant changes in the updated emphasis program include:

  • An updated list of North American Industry Code System establishment codes identified for inclusion in the program.
  • Allowing establishments that had an inspection under the NEP in the previous 24 months and did not report an amputation to be deleted from the programmed inspection list.
  • Revisions to the OSHA Information Systems coding instructions. 

The updated program will replace the previous version that is set to end on June 27, 2025, and will be in place for five years from the effective date.

Learn more about OSHA and protecting workers from amputations.

Agency
Occupational Safety & Health Administration
Date
June 26, 2025
Release Number
25-944-NAT
Media Contact: Kristen Knebel
Share This

US Department of Labor cites two event production companies after stagehand’s fatal injury at Orlando music festival site

News Release

US Department of Labor cites two event production companies after stagehand’s fatal injury at Orlando music festival site

Stage FX, James Thomas Productions were cited for exposing workers to crushing hazards

ORLANDO, FL – The U.S. Department of Labor’s Occupational Safety and Health Administration cited two event production companies following an inspection concerning an October 2024 employee fatality.

Stage FX Inc. and James Thomas Productions LLC were cited with serious violations for allegedly failing to maintain structural stability during the erection of a stage and failing to provide proper employee training on the associated hazards. 

James Thomas Productions paid $19,860 to address the violations, while Stage FX has contested the findings before the independent Occupational Safety and Health Review Commission.

Learn more about OSHA, preventing struck-by-hazards, and how to access the agency’s free compliance assistance resources. 

Agency
Occupational Safety & Health Administration
Date
June 16, 2025
Release Number
25-891-ATL
Media Contact: Erika Ruthman
Media Contact: Eric R. Lucero
Phone Number
Share This

US Department of Labor and Adidas America reach settlement for $235K in penalties resolving fall hazard and unsafe ladder violations

News Release

US Department of Labor and Adidas America reach settlement for $235K in penalties resolving fall hazard and unsafe ladder violations

ALBANY, NY – The U.S. Department of Labor has entered into a settlement agreement with Adidas America Inc. that requires the company to pay $235,000 in fines and implement enhanced safety measures at multiple facilities.

The agreement comes after the department’s Occupational Safety and Health Administration conducted a 2024 follow-up inspection at an Adidas warehouse in upstate New York. OSHA initially cited for hazards in 2021 during an inspection that found missing guardrails and an unsafe ladder.

Inspectors returned in 2024 to find that Adidas had not corrected the hazards cited in 2021 and found an additional unsafe ladder violation. 

The May 30, 2025, settlement requires Adidas to implement enhanced abatement measures at its facilities in New York, New Jersey, and Puerto Rico, including adopting a comprehensive Safety and Health Management program, retraining employees on fall hazards, assessing and auditing potential fall hazards at each facility, and discontinuing use of overhead storage in the facilities. 

Adidas also agreed to pay $235,000 in penalties. 

Adidas America Inc. is a subsidiary of Adidas AG, an athletic apparel and footwear corporation headquartered in Herzogenaurach, Bavaria, Germany.

OSHA’s Warehousing page provides solutions to prevent injuries from hazards including forklifts, slips, trips and falls and materials handling. The agency’s stop falls website offers safety information and video presentations in English and Spanish to teach workers about fall hazards and proper safety procedures.

Learn more about OSHA.

Agency
Occupational Safety & Health Administration
Date
June 4, 2025
Release Number
25-899-NEW
Media Contact: Kristen Knebel
Share This
Subscribe to Occupational Safety & Health Administration